Abrasive Blasting  •  Blast Cabinets & Accessories  •  Media  •  Pressure Blasters  •  Blast out of a Bucket  •  Nozzels  •  Siphon Blaster
	1 of 12

1/2" Universal Soda Blasting Retro Fit Kit Universal Soda Blasting Retrofit Kit allows user to convert either a 3/8" or 1/2" pressure blaster into a Soda Blaster. Complete kit with instalation and usage instructions included. Bicarbonate soda also availble convient 50lb bags with #11806 being our most popular

1/4 in ID Tungsten Carbide Nozzle Tungsten carbide direct pressure nozzle, in steel threaded jacket. 1/4" ID - 3/4" - 14 NPS Thread x 1-11/16" length. Requires 80 CFM of air at 80 PSI Life expectancy - 100 hours Note - When you thread a nozzle into the nozzle holder make sure the rubber washer on the nozzle seats tightly against the abrasive feed hose. Any gap will allow air and abrasive to wear parts prematurely. MADE IN USA

1/4" Brown Plastic Medium-Cut Pyramids 2.5 lbs The Brown Rust Cutting Media quickly removes rust, paint and plated coatings about 3 times faster than the Green Rust Cutting Media. Abrasive is blended throughout so that fresh abrasive is constantly exposed. Reuse until it literally disappears.

1/4" Carbide Blast Nozzle The carbide Blast Nozzle offers superior durability compared to steel and ceramic nozzles. For best results use this Carbide nozzle with a Carbide air jet. The Carbide Air Jet (22080B) is available separately.

1/4" Carbide Nozzle W/Matching Carbide Air Jet All Carbide Nozzle Set - Both the Nozzle and Air jet are Carbide for superior durability. When commnon steel air jets wear the abrasive/air stream is deflected to the bottom edge of the Nozzle causing accelerated wear. This 1/4" set includes a carbide nozzle, carbide air jet and rubber washer. Air use is 15 cfm at 80 psi. The 1/4" Carbide Air Nozzle (22080A) and Air Jet (22080B) are available separately. Made in the USA.

100 Pound Pressure Blaster Heavy duty abrasive blaster features an extra thick, 4 ply abrasive hose for blasting, a funnel top easy loading, safety shut-off switch with steel block and ceramic nozzle. The unique filler plug can be completely removed. Baster can be used with glass beads, metal shot, aluminum oxide, and nut shell. Imported.

110lb Soda Blaster Starter Kit with Media Your new soda blaster is a professionally designed unit with only a few consumables or replacement parts. The bicarbonate media we suggest for quick paint removal is our #11806 Medium media in the 50lb bag. Also the nozzles will wear during use and will need replacement for optimal performance. Use #22012 3/32" Ceramic Nozzle

12 CFM Air Jet Assembly Tungsten carbide air jet for 12 CFM nozzle. 1/4" ID Used in Gun Body EW# 50598. MADE IN USA

12 CFM Gun Assembly Componet Cast aluminum blast gun with tungsten carbide nozzle and air jet. Standard gun on all siphon cabinets 30-0 and smaller. Requires 12 CFM of air at 80 PSI. Best gun for users with smaller air compressors - be can sudstituted for 25 CFM if you wish - must be noted on order. Note: smaller air compressors range 5 HP to 7 1/2 HP two stage.

12 CFM Gun Body Only Cast aluminum blast gun. Standard gun body used on all siphon cabinets 30-0 and smaller. Uses nozzle EW# 50597 and air jet EW# 50599. MADE IN USA

12 CFM Tungsten Carbide Nozzle 1/4 in ID Tungsten carbide nozzle - 1/4" ID - 9/16" OD x 1 1/2" length Used in Gun Body EW#50598 MADE IN USA Life expectancy - 100 hours

23"x20" Bench Top Blast Cabinet-Polymer 20-1/2"H This ALC Bench top Blaster Cabinet features: Heavy Duty LDPE Polymer Plastic "No Leak" 1-pc construction; 23"W x 19"D x20-1/2"H I.D.; self-adhesive underlay Oversize top window/door; Pistol grip trigger gun; Ships UPS. Made in USA.

Copyright 2007 OnlineToolSupply.com