|
|
|
| |
|
|
| |
1 of 1 |
| |
|
 |
EASTWOOD 100LB ABRASIVE PESSURE BLASTER 1/2 I.D. Bigger is Better! Higher Flow 1/2" fittings are able to deliver more CFM than 3/8". Steel 100lb capacity Eastwood Blaster for 30-60 minutes of blasting at a minimum of 10 CFM @ 65-125 PSI. Includes; Moisture Separator, Gauge, 1/2"I.D x 8' hose, (1 each) 2.0 2.5, 3.0 & 5.0 mm Nozzles, Hood and Funnel. Tank: 18.5"H x 12". Overall height: 34.5 Imported. 1 Year Limited Warranty. |
 |
EASTWOOD 200LB ABRASIVE PRESSURE BLASTER 1/2 I.D. Bigger is Better! Higher Flow 1/2" fittings are able to deliver more CFM than 3/8". Steel 200lb capacity Eastwood Blaster for 1-2 hours of blasting at a minimum of 10 CFM @ 65-125 PSI. Includes; Moisture Separator, Gauge, 1/2"I.D x 8' hose, (1 each) 2.0, 2.5, 3.0 & 5.0 mm Nozzles, Hood and Funnel. Tank: 23.5"H x 15". Overall height: 37". For best results and efficient operation, use 80 grit or finer- clean and dry abrasive medias. Imported. 1 Year Limited Warranty. |
 |
EASTWOOD 50 LB ABRASIVE PRESSURE BLASTER 1/2 I.D. Bigger is Better! Higher Flow 1/2" fittings are able to deliver more CFM than 3/8". Steel 50 lb capacity Eastwood Blaster for 30-60 minutes of blasting at a minimum of 10 CFM @ 65-125 PSI. Includes; Moisture Separator, Gauge, 1/2"I.D x 8' hose, (1 each) 2.0, 2.5, 3.0 & 5.0 mm Nozzles, Hood and Funnel. Tank: 18.5"H x 12". Overall height: 34.5. For best results and efficient operation, use 80 grit or finer- clean and dry abrasive medias. Imported. 1 Year Limited Warranty. |
 |
70 minute blasting time, 160 lb media hopper, Two 1/8" (15 cfm) nozzles, One 5/32" (7 cfm) nozzle, 15 ft. 1/2"ID hose, Blast Hood with Bump Cap, Moisture Separator. Wear all appropriate safety gear. Blast hoods provide NO respiratory protection. Be sure to wear appropriate respiratory protection. |
 |
Model 300 (ASME Certified) 125 minute blasting time, 250 lb media hopper, Two 1/8" (15cfm) nozzles, Three 5/32" (25cfm) nozzles, 25' 1/2" ID hose. Blast Hood with Bump Cap, Moisture Separator. Blast hoods provide NO respiratory protection. Wear all appropriate safety gear and respiratory protection. THIS ITEM MAY TAKE 10 DAYS TO 2 WEEKS FOR DELIVERY Please call Customer Service for a shipping quote 1-800-544-5118 |
|
This top quality pressure blaster is designed to tackle even the toughest jobs. It is a complete system, just hook up to the air compressor, put on appropriate hood and respiratory protection, fill with blasting media and you're ready to blast. This system has the following features: one-hand, auto shut-off deadman valve, air consumption as low as 10cfm @80 psi, convient top-loading hopper. 3 seal blocks, 2 year ltd. warr, 100 lb media hopper, two 1/8" (15 cfm) nozzles one 3/32" (7 cfm) nozzle, 10 ft. 1/2" i.d. hose. |
Copyright 2007 OnlineToolSupply.com
|
|
