Engine & Drivetrain  •  Books & Videos  •  Porting & Grinding  •  Storage  •  Cleaning  •  Radiator Tools  •  Testers  •  Engine Tools  •   •
	2 of 12

Battery Tender 6V Batteries in storage can lose significant capacity in just 12 to 20 days, based on weather conditions and battery age! Batteries left uncharged through the winter can freeze, causing the casing to crack. Connect the alligator clips to your battery terminals, plug it into a wall outlet. It will maintain a 100% charge constantly without damaging the battery. Spark free and temperature compensated, with short circuit and reverse polarity protection. Output is 1.25 amps. Limited 10 year manufacturer's warranty.

Battery Tender Extension Lead 25" for 12V only Battery Tender's 25 foot Lead Extension for 12V systems allows you to take the charge to your battery. This lead can not be used on the 6V Battery Tender Junior systems.

Battery Tender Jr 12V Maintain full charge for less. Operating on the same principle as the original Battery Tender economy 'Junior' plugs right in to the outlet and has a 12 ft. cord to reach the vehicle. Includes alligator and ring connectors. Great for ATV's, bikes or in any tight spot. It will maintain a 100% charge constantly without damaging the battery. Spark free and temperature compensated, with short circuit and reverse polarity protection. Output is .75 amps. Limited 5 year manufacturer's warranty. Imported.

Battery Tender Jr 6V Maintain full charge for less. Operating on the same principle as the original Battery Tender economy 'Junior' plugs right in to the outlet and has a 12 ft. cord to reach the vehicle. Includes alligator and ring connectors. Great for ATV's, bikes or in any tight spot. It will maintain a 100% charge constantly without damaging the battery. Spark free and temperature compensated, with short circuit and reverse polarity protection. Output is .75 amps. Limited 5 year manufacturer's warranty. Imported.

Calyx Manifold Coating 3 oz Calyx Manifold Dressing - Make your exhaust manifolds look like new in a few minutes. Not as durable as our paint on coatings but convenient and easy to apply because there's no disassembly required. Just remove loose rust and rub in thoroughly. Non-toxic and water-soluble. A little goes a long way one container treats 8-10 typical V8 exhaust manifolds. Includes Instructions. Made in USA.

Carbide Bead Burr 6 Inches Long Set Of 4 Super-hard carbide burrs used in a high-speed die grinder can really make a tough job easier. Grind weld beads, shape parts, smooth rough castings, port cylinder heads. All burrs have a 1/4" dia. shank. Burr sets include: cylinder, pointed tree shaped and round nose. Individual burrs are available separately. Use these above burrs for Steel and Iron. Use (46060) 6" Tree Shaped Burr for Aluminum.

Carbide Burr SA-1 1/4X5/8X1/4 dbl Cylinder This 1/4" diameter cylindrical carbide burr measures about 2" long, with the cutter portion measuring about .6". Fits 1/4" collets. This burr is for use on Steel and Iron. Use (46029) Tree Shaped Burr for working with Aluminum.

Carbide Burr SA1L6 Cylindrical 6" This 1/4" carbide cylinder burr measures about 6" long with 1/4" shank. Use this burr for working with Steel and Iron. Use (46060) 6" Tree Shaped Burr for working with Aluminum.

Carbide Burr SC3L Re 3/8X1X1/4 Dbl Round This rounded end burr measures about 3" long with a 1/4" shaft. Use this burr for working with Steel and Iron. Use (46029) Tree Shaped Burr for working with Aluminum.

Carbide Burr Set Of Four Super-hard Carbide Burrs used in a high-speed die grinder can really make tough jobs easier. Grind weld beads, shape parts, smooth rough castings, port cylinder heads. All burrs have a 1/4" dia. shank. Burr sets include: cylinder pointed, tree-shaped and rounded nose. Individual burrs are tree-shaped. All 2-1/2" - 3" Carbide Burrs are individually packaged. Most commonly used on Steel and Iron. Use (46029) for a Tree Shaped Burr for Aluminum.

Carbide Burr SF-5 Tree Shaped Super-hard carbide burrs used in a high-speed die grinder can really make tough jobs easier. Grind weld beads, shape parts, smooth rough castings, port cylinder heads. All burrs have a 1/4" dia. shank. This burr is for use on Steel and Iron. Use (46029) Tree Shaped Burr for working with Aluminum.

Carbide Burr SF5L6 Tree Shaped 6" Use this long bead burr on steel and cast iron to quickly shape and remove casting flash. Works best in air die grinders with light side pressure. Use 80 Grit Abrasive Rolls available in cylinders (13091A) and tapers (13090A) to smooth away marks from the burr.

Copyright 2007 OnlineToolSupply.com