Engine & Drivetrain  •  Books & Videos  •  Porting & Grinding  •  Storage  •  Cleaning  •  Radiator Tools  •  Testers  •  Engine Tools  •   •
	3 of 12

Carbide Burr SL-3 3/8X1-1/16X1/4 Dbl Cone This cone shaped carbide burr measures about 3" overall and has a 1/4" shaft. Use this burr for working with Steel and Iron. Use (46029) Tree Shaped Burr for working with Aluminum.

Carbide Burr SL3L6 Tapered Cone 3/8 EndRadius This carbide cone shaped burr measures about 6" with a 1/4" shank. Use this burr for working with Steel and Iron. Use (46060) 6" Tree Shaped Burr for working with Aluminum.

Carbide Radius End Burr SC3L6 3/8x3/4 6"dbl This round nosed carbide burr measures about 6" long with a 1/4" shank.

Ceramic Coating White 4 oz. Colorguard White reduces temperatures under the hood and on the exhaust manifold surface. Colorguard also improves exhaust gas velocity and increases horsepower. No oven baking required. Shops bake at 750F for full cure.

CERMAGLOW METALLIC CERAMIC POLISH Now you can safely polish your ceramic headers for that just coated look. This specially designed formula is safe for all the popular ceramic coatings and is easy to apply. Simply apply with a soft cloth and buff until desired shine is achieved. The more you buff, the greater the shine and a little goes a long way. 6 ounces. Made in the USA.

Chevy LS-1 Engine Stand - no casters Chevy LS1 Engine Stand - no casters The mount brackets are 1/4 inch steel plate with pre-drilled holes that match the motor mount pattern welded to tubular steel supports. The angled supports are 1in Wx2in H x.084in Tube steel featuring solid welds on all joints. Plastic end caps are included. For easy motor movement and placement order the optional set of 4 Steel Weels (EW 29343) Made in USA Black powder coat finish for protection.

Chevy Small & Big Block Engine Stand-no casters Chevy Small & Big Block Engine Stand-no casters The mount brackets are 1/4 inch steel plate with pre-drilled holes that match the motor mount pattern welded to tubular steel supports. The angled supports are 1in Wx2in H x.084in Tube steel featuring solid welds on all joints. Plastic end caps are included. For easy motor movement and placement order the optional set of 4 Steel Weels (EW 29343) Made in USA Black powder coat finish for protection.

Clear Zinc 12 oz Aerosol 12/CS Clear Zinc 12 oz Aerosol 12/CS

Colortune Engine Analyzer Now you can adjust the idle mixture and determine the overall condition of your carb during actual use. Simply screw the Colortune Engine Analyzer into one of the spark plug holes and you can see the color of the flame produced during combustion. Includes detailed, full-color instructions, special viewer, brush and extesion. Fits cars with 14mm thread spark plugs.

CRC Clean-R-Carb Aerosol CRC's Clean-R-Carb is a must for any shop or garage. This aggressive carburetor cleaner penetrates deep in your carb to remove carbon deposits that can impact your performance and fuel economy. 16 oz aerosol, OK for sale or use in CA.

CRC Lectra Motive Electric Parts Cleaner Are you rebuilding your alternator, starter or generator? Then you'll need CRC's Lectra Motive electric motor cleaner. This aggressive cleaner will remove years of road grime, grease and flux. Also works great on shop equipment such as grinder motors, buffers and battery chargers. Not for use with sensitive electronics, use CRC QD Electronic Cleaner.

CRC QD Contact Cleaner Aerosol CRC's QD Contact Cleaner is a must for any shop or garage. This cleaner is designed for use on sensitive electronic equipment and is plastic safe. Use on your Mass Air Flow sensor, electrical connectors, fuse blocks and so much more. 11 oz aerosol.

Copyright 2007 OnlineToolSupply.com