|
|
|
| |
|
|
| |
1 of 21 |
| |
|
 |
The Clarke 130 amp stick welder adjusts from 40-100 amps with peaks up to 130. Suitable for welding.050"(18 gauge steel) up to 1/4" 30% duty cycle. Requires a 110 VAC 25 amp circuit. Includes welder, hand held shield 5' ground cable, 8' stick cable, 6' power cord. and complete instructions. Made in Italy. |
 |
The Model 130 MIG welds up to 3/16" steel. 4 heat settings and infinitely adjustable speed control dials-in the perfect setting. Max. output 100 amps with 30% duty cycle. Requires 120 Volts 60 cycle 15-amp circuit. Welder measures 11" wide by 15" high by 19" deep. includes cart, dual gauge regulator, helmet, 1# spool of.035" flux core wire, gas conversion kit with 1# spool of.023" mild steel wire and written and video instructions. Clarke welders carry a 1-year manufacturer's warranty plus 10-year warranty on power transformer. Made in Italy. Welder weighs 53 lbs. Pkg weighs 91 lbs. Heavy Charges Apply. |
 |
Sheet Metal Bending Brake - Perfect for fabricating small patch panels! bends up to 18 gauge alumium, 20 gauge steel, heavier gauges in narrower widths. Mounting holes in base to readily attach to your workbench. Made in the USA. |
 |
The Model 180 MIG welds up to 1/4" steel. 6 heat settings and infinitely adjustable wire speed control welds a wider range. Max. output 160 amps with 30% duty cycle. Requires 220 Volts 60 cycle 30-amp circuit. Welder measures 11" wide by 15" high by 19" deep. includes cart, dual gauge regulator, 1# spool of.035" flux core wire, gas conversion kit with 1# spool of.023" solid steel wire, auto dimming solar 3 shade helmet, written and video instructions. 1-year manufacturer's warranty w/10-year warranty on the power transformer. Made in Italy. Welder weighs 64 lbs. Complete pkg. weighs 99 lbs. Heavy Charges Apply. |
 |
Extended Reach Bossing Mallet PreventS the handle from hitting the edge of deeply formed shapes. Typically used with our Panelbeater Sandbags. This 2-3/4" Mallet is ideal for aluminum or steel. Nicely balanced. |
 |
Clarke 200 Amp Mig Welder features 7 heat settings and variable wire feed controls. Suitable for welding light 22 gauge(.031") to 5/16", 30% duty cycle. Can be used with or without shielding gas. (requires a 19238 regulator for gas use,notincluded)Requires a 220 VAC 30 amp circuit. Includes welder, hand held shield, 10'ground cable,10'torch assembly, 6'power cord, 30-200 Amps output, instructions. INCLUDES FREE GRINDER. NOTE: Heavy Weight Shipping Charges Apply. Please call Customer Service at 1-800-544-5118. |
 |
The Clarke 265 Amp MIG Welder features 7 heat settings and vaiable wire feed controls. Suitable for welding light 22 gauge (.031") to 7/16", 30% duty cycle Can be used with or without shielding gas.(requires 19238 regulator for gas use not included) Requires a 220 VAC 30 amp circuit. Includes welder, hand held shield, 10'ground cable, 10'torch assembly, 6' power cord, 35-270 Amp output. Made in Italy. INCLUDES FREE GRINDER. NOTE: Heavy Weight Shipping Charges Apply. Please call Customer Service at 1-800-544-5118. |
 |
Slice through sheet metal, muffler clamps, and steel rods up to 3/4" thick. Uses an abrasive cut-off wheel which spins at 22,000 rpm for fast cutting in tight places. Has 1/4" NPT air inlet and uses 4 cfm at 90 psi. Will work on 1 hp or larger compressor. Face shield recommended. Can be used with our 3" Cut-Off wheels sold in a pack of 5 (28105), pack of 10 (28084D) or Pack of 30 (28084C). |
 |
Cut-Off Wheels - Cut through damaged metal and rods up to 3/4" thick. Wheels are 3" diameter with 3/8" mounting hole. Maximum RPM 25,000. Made in the USA. 46 Grit 3" x 1/16"T |
 |
Hand Held Bending Brake - Shape patch panels on site. Accurately create bends and professional looking folds in up to 22 gauge steel or 24 gauge stainless steel. Perfect for creating patch panels for door edges of rocker panels, etc. Assembled with high strength Grade 8 bolts. High carbon steel drop forged jaws are marked in 1/4" increments to assure straight bends. Compound leverage and serrated jaws provide a non-slip grip. Cushioned handles. Limited lifetime manufacturer's warranty. Made in the USA. |
 |
Hand Held Bending Brake - Shape patch panels on site. Accurately create bends and professional looking folds in up to 22 gauge steel or 24 gauge stainless steel. Perfect for creating patch panels for door edges of rocker panels, etc. Assembled with high strength Grade 8 bolts. High carbon steel drop forged jaws are marked in 1/4" increments to assure straight bends. Compound leverage and serrated jaws provide a non-slip grip. Cushioned handles. Limited lifetime manufacturer's warranty. Made in the USA. |
 |
Sheet Metal Bending Brake - Perfect for fabricating small to large patch panels! The 30" brake bends up to 16 gauge aluminum, 18 gauge steel, heavier gauges in narrower widths. Mounting holes to bolt to your workbench. Made in the USA. |
Copyright 2007 OnlineToolSupply.com
|
|
