Specialty Paints and Cad Coating Colors at Online Tool Supply.

Specialty Paints and Coatings

Specialty Coatings

• Blackening System
• Brake
• Cad Coating Colors
• Chassis
• Clears
• Engine Enamels
• Exhaust System
• Fuel System
• Hammerite
• Metal Finishes
• Paint Pens

Specialty Coatings

• Plastidip
• Plating System
• Pre-Paint Prep
• Radiator
• Trim Paint
• Truck Bed Liner
• Trunk
• Underhood Black
• Wheel
• Wrinkle

HotCoat Powder Coatings

• Accessories for Original Gun
• Accessories for Pro Gun
• Booths
• Chemical Prep
• HotCoat Pro Gun
• Original Gun
• Ovens
• Powders
• Sand Blast Prep

House of Kolor

• Color Cards, Books, Videos
• Dry Flakes
• Intensifiers
• Kosmic Kolor Urethane Enamels
• Paint Specialty Items
• Pearl Concentrates
• Shimrin Universal Bases
• Striping and Lettering Enamels
• Surface Prep and Undercoats

1 of 1

EW Golden Cad Gold Base Step #1 14 oz

Golden Cad Base - Golden Cad base produces a reflective gold finish ideal as a foundation for replicating Golden Cad. For best results follow with Steps 2 Red Tint (10333Z), and 3 Green Tint (10334Z). Golden Cad Base Coat is a durable enamel formulation. Net wt. 12 oz. Withstands temperatures up to 250 degrees F. Each can covers 6 sq. ft. Gloss 30%. Use Self Etching Primer (16014Z) on clean bare metal for enhanced adhesion and durability.

EW Silver Cad Aerosol 12 oz

This easy-to-apply, single step aerosol system has been specially formulated to recreate the look of actual silver cadmium plating. Not merely silver paint, Silver Cad faithfully recreates the bluish-silver tint of the original. Perfect for coil clamps, alternator pulleys, carburetor and transmission linkage rods and much, much more! Acrylic lacquer withstands up to 250 degrees Farenheit. Buy 3 or more and SAVE!

EW Zinc Dichromate Green Step #3 14 oz

Green Zinc Tint is used over either the Golden Cad Base Coat or Black Base to add realistic red highlights. This application usually follows Red Zinc Tint (10333Z). Top coating the completed cured surface with Diamond Clear for Bare Metal (10200Z) enhances appearance and durability. Red Zinc Tint is supplied in a 12 oz. net wt. aerosol can. Withstands temperatures up to 250 degrees F. Acrylic Enamel, covers 6 sq. ft., Gloss 30%.

EW Zinc Dichromate Red Step #2 14 oz

Red Zinc Tint is used over either the Golden Cad Base Coat or Black Base to add realistic red highlights. This application is usually followed by Green Zinc Tint (10334Z). Top coating the completed cured surface with Diamond Clear for Bare Metal (10200Z) enhances appearance and durability. Red Zinc Tint is supplied in a 12 oz. net wt. aerosol can. Withstands temperatures up to 250 degrees F. Covers up to 6 sq. ft. Acrylic enamel formulation. 30% Gloss.

Golden Cad Kit

Golden Cad - This new acrylic enamel 3-step system has been designed to achieve a more realistic effect than our original Golden Cad System. Withstands temperatures up to 250 degrees F. Produces a natural 30% gloss. Can be used on most parts without expensive replacement or replating. Provides long-lasting protection against corrosion. Includes Gold Base, Red Zinc, and Green Zinc all in 12 oz net wt. aerosol cans (enough to cover 6 sq. ft.). Clear with (10200Z) Diamond Clear Gloss for Bare Metal for better durability.

New Golden Cad System W/Diamond Clear

Golden Cad - This new acrylic enamel 3-step system has been designed to achieve a more realistic effect than our original Golden Cad System. Withstands temperatures up to 250 degrees F. Produces a natural 30% gloss (90% with Diamond Clear Gloss top coat). Can be used on most parts without expensive replacement or replating. Provides long-lasting protection against corrosion. Includes Gold Base, Red Zinc, Green Zinc and a can of (10200Z) Diamond Clear Gloss for Bare Metal for increased shine and durability. 12 oz net wt. aerosol cans (enough to cover 6 sq. ft.).

Page: 1